Pixit For Control Model - Toshiba GRE110 Instruction Manual

PIXIT for Control model

ID Description
Ct1 What control models are supported
(compare PICS)
Ct2 Is the
configurable and/or online changeable?
Ct3 Is Time activated operate supported
Ct4 Is "operate-many" supported
Ct5 Will the DUT activate the control
output when the test attribute is set in
the SelectWithValue and/or Operate
request (when N test procedure Ctl2 is
applicable)
Ct6 What are the conditions for the time
(T) attribute in the SelectWithValue
and/or Operate request?
Ct7 Is pulse configuration supported
Ct8 What is the behavior of the DUT when
the check conditions are set?
Is this behavior fixed, configurable,
online changeable?
Ct9 What additional cause diagnosis are
supported?
Ct10 How to force a "test-not-ok" respond
with SelectWithValue request?
control model fixed,
 339 
Value / Clarification
Y status-only
Y direct-with-normal-security
Y sbo-with-normal-security
N direct-with-enhanced-security
N sbo-with-enhanced-security
Configurable
(need to restart after configuration)
N
N
N
FALSE
Test flag
IED
Mode
Normal Accepted
Test Rejected
Accepted:
The control request is accepted by IED.
Rejected:
The control request is rejected by IED with
AddCause "Blocked-by-Mode".
N.A.
N
Only interlock bit is checked.
This behavior is fixed.
Note:
When interlock is an enable, the control
request is rejected by IED with AddCause
"Blocked-by-Interlocking".
Y Not-supported
N Blocked-by-switching-hierarchy
Y Select-failed
N Invalid-position
N Position-reached
N Parameter-change-in-execution
N Step-limit
Y Blocked-by-Mode
N Blocked-by-process
Y Blocked-by-interlocking
N Blocked-by-synchrocheck
N Command-already-in-execution
N Blocked-by-health
N 1-of-n-control
N Abortion-by-cancel
N Time-limit-over
N Abortion-by-trip (only for BCPU)
Y Object-non-selected
Set orCat with unsupported value.
6 F 2 T 0 1 7 2
TRUE
Rejected
Accepted