Toshiba GRE110 Instruction Manual page 120

M O C 2 C - I E E E
M I / V I / E I
M O C 2 C - U S
C O 2 / C O 8
O C 2 R
D E F / D E P
O C 2 - 2 F
N A / B l o c k
O C 3 E N
O F f / O n
O C 3 - 2 F
N A / B l o c k
O C 4 E N
O f f / O n
O C 4 - 2 F
N A / B l o c k
U C 1 E N
O f f / O n
U C 2 E N
O f f / O n
<OC1EN>, <OC2EN>
• Enter 1(=On) to enable the OC1 or OC2 and press the ENTER key. If disabling the OC1 or
OC2, enter 0(=Off) and press the ENTER key.
<MOC1C>, <MOC2C>
To set the Inverse Curve Type, do the following.
• If [MOC1C] or [MOC2C] is 1(=IEC), enter 0(=NI) or 1(=VI) or 2(=EI) or 3(=LTI) and press
the ENTER key.
• If [MOC1C] or [MOC2C] is 2(=IEEE), enter 0(=MI) or 1(=VI) or 2(=EI) and press the
ENTER key.
• If [MOC1C] or [MOC2C] is 3(=US), enter 0(=CO2) or 1(=CO8) and press the ENTER key.
<OC1R>, <OC2R>
To set the Reset Characteristic, do the following.
• If [MOC1C] or [MOC2C] is 2(=IEEE), 3(=US) or 4(=C), enter 0(=DEF) or 1(=DEP) and
press the ENTER key.
<OC3EN, OC4EN, UC1EN, UC2EN>
• Enter 1(=On) to enable the OC3 and press the ENTER key. If disabling the OC3, enter
0(=Off) and press the ENTER key. The OC4, UC1 and UC2 are the same.
0
This setting is displayed if [MOC2] is 2(=IEEE).
0
This setting is displayed if [MOC2] is 3(=US).
0
This setting is displayed if [MOC2] is 2(=IEEE),
3(=US) or 4(=C).
0
1
0
1
0
1
1
 119 
6 F 2 T 0 1 7 2