Manual Close Function; Manual Input Function - Toshiba GRE110 Instruction Manual

RS-ARCBLK
CB CLOSE
ARC_IN-PROG
Manual close function (MANUAL CLOSE)
MANUAL CLOSE enables the CB to be closed via a PLC signal input.
Autoreclose initiation is not active within a set period of time after a manual close command output.
The period of time is selected by setting [TARCP] to "0.1-600.0s".
In the case of final trip judgement, a manual close command output is blocked within a set period of
time. The period of time is selected by setting [TRCOV] to "0.1-600.0s".
2.13.3 Setting
The setting elements necessary for the autoreclose and their setting ranges are shown in the table
below.
Element Range
TRDY 0.0 – 600.0 s
TD1 0.01 – 300.00 s
TR1 0.01 – 310.00 s
TD2 0.01 – 300.00 s
TR2 0.01 – 310.00 s
TD3 0.01 – 300.00 s
TR3 0.01 – 310.00 s
TD4 0.01 – 300.00 s
TR4 0.01 – 310.00 s
TD5 0.01 – 300.00 s
TR5 0.01 – 310.00 s
TW 0.01 – 10.00 s
TSUC 0.0 – 600.0 s
TRCOV 0.1 – 600.0 s
TARCP 0.1 – 600.0 s
TRSET 0.01 – 300.00 s
[ARCEN] Off/On
&
TRSET
t
&
0.01-300.00s
Figure 2.13.4 Reset
ARC-FT
TARCP
t
0.1-600.0s
TRCOV
0
0.1-600.0s
MANUAL CLOSE
Figure 2.13.5 Manual input function
Step
0.1 s
0.01 s
0.01 s
0.01 s
0.01 s
0.01 s
0.01 s
0.01 s
0.01 s
0.01 s
0.01 s
0.01 s
0.1 s
0.1 s
0.1 s
0.01 s
 59 
≥1 ARC_RESET
0
0
t
1
&
Default Remarks
60.0 s Reclaim time
10.00 s 1 shot dead time for Stage 1
st
310.00 s 1 shot reset time for Stage 1
st
10.00 s 2 shot dead time for Stage 1
nd
310.00 s 2 shot reset time for Stage 1
nd
10.00 s 3 shot dead time for Stage 1
rd
310.00 s 3 shot reset time for Stage 1
rd
10.00 s 4 shot dead time for Stage 1
th
310.00 s 4 shot reset time for Stage 1
th
10.00 s 5 shot dead time for Stage 1
th
310.00 s 5 shot reset time for Stage 1
th
2.00 s Output pulse time
3.0 s Autoreclose succeed judgement time
10.0 s Autoreclose recovery time after final trip
10.0 s Autoreclose pause time after manually closing
3.00 s Autoreclose reset time
Off Autoreclose enable
6 F 2 T 0 1 7 2