Execute Program - Siemens SINUMERIK 840D Operator's Manual

4
03.04

4.6.2 Execute program

Program
overview
Cycle Start
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Function
After selection of a workpiece or program overview, individual
workpieces or programs can be enabled or disabled for execution.
Operating sequence
The "Auto" operating mode is selected in the "Machine" operating
area.
The appropriate channel is selected.
The channel is in reset state.
The workpiece/program to be selected is in the memory.
When you press softkey "Program overview", the software
automatically changes to the "Program" operating area. An overview
of all workpiece directories/programs is displayed.
See Chap. 6:
•
Execute a program on the NC for execution
•
Execute program from network drive, compact flash card,
diskette.
Once you have selected the desired workpiece/program for execution,
use the machine area key to change back to the "Machine" operating
area.
The program starts running when you press the "NC Start" key, and
you can track the axis position, spindle, etc in the display.
Machine Operating Area
4.6 Automatic mode
4
4-105