Tool Management Basic Display - Siemens SINUMERIK 840D Operator's Manual

5
Parameters Operating Area
5.3 Tool management

5.3.1 Tool management basic display

Loc. No.
Tool designation
Duplo no.
5-142
You can manage your tool magazines in the "Magazine list" basic
display.
The tool management offers the most commonly used tools as tool
types. You can assign geometric and technological data to the tool
types in order to set up your master tool data. There can still be
several versions of each tool. You can assign the actual data of the
tool used (particular tool data) to these versions.
The tool management basic display contains the current "magazine
list" with the following information:
Location number
Name of tool
Other displays configured by the machine manufacturer, e.g.
Number of spare tool (replacement tool)
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
5
03.04
 Siemens AG, 2004. All rights reserved