Siemens SINUMERIK 840D Operator's Manual page 271

7
03.04
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
ISO punched tape with two ISO programs:
%
01026(HYDRAULIC BLOCK)
N20 G00 G80 G90 G40 G17
N40(NC-SPOT DRILL)T01 M06
N50 G55 G43 Z20. H01 S1000 F100 M03
N55 X10. Y-8. M08 T02
(...)
N690 Y-43.
N700 G80 Z35.
N710 T00 M66
N715 G53 Y0. Z0.
N720 M30
:1127(ANGLE)
N10(2. SPEED RANGE)
N20 G00 G80 G90 G40 G17
N120(SPI-BO 11)T01 M06
N130 G55 G43 Z20. H01 S2300 F460 M03
(...)
N180 Y-72.
N190 G80 Z35.
N195 T00 M66
N200 G53 Y0. Z0.
N210 M30
%
This punched tape generates two programs when imported:
_N_1026_MPF and _N_1127_MPF; the title is retained after the
program number:
Program _N_1026_MPF:
(HYDRAULIC BLOCK)
N20 G00 G80 G90 G40 G17
N40(NC-SPOT DRILL)T01 M06
(...)
N710 T00 M66
N715 G53 Y0. Z0.
N720 M30
Program _N_1127_MPF:
(ANGLE)
N10(2nd SPEED RANGE)
N20 G00 G80 G90 G40 G17
(...)
N200 G53 Y0. Z0.
N210 M30
Services Operating Area
7.5 Main services screen
7
7-271