Changing A Contour - Siemens SINUMERIK 840D Operator's Manual

6
03.04

6.5.4 Changing a contour

Alter a contour element
Accept
element
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
6.5 Free contour programming
You can change a previously created contour later.
Individual contour elements can be
•
appended
•
changed
•
deleted
If your program contains two contours of the same name, changes to
the one contour are automatically applied to the second contour with
the same name.
Sequence
Select the contour.
Press the "Cursor Right" key.
Position the cursor on the contour element that you want to modify.
Press "INPUT" key
The associated input form is opened and an enlarged view of the
selected element appears in the programming graphic.
After inputting the changes, press the "Accept element" softkey.
Program Operating Area
6-213
6