5
Parameters Operating Area
5.3 Tool management
Find/
position
OK
Find/
position
Find
location
Position
5-150
Press the "Find/position" softkey.
A dialog box is overlaid. Enter the tool identifier e.g. T501, duplo No.
e.g. 2, as well as the load point.
Press "OK" to execute.
A message appears: e.g. "location 1 found".
Continue to press the "Find/position" softkey.
The vertical softkey bar changes.
Press the "Find location" softkey. The system suggests the location.
Press the "Position" softkey.
The tool/location is moved to the load point. If there are several load
points, a window opens in which you can select the appropriate point
with the cursor.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
5
03.04
Siemens AG, 2004. All rights reserved