Siemens SINUMERIK 840D Operator's Manual page 46

2
Operator Components/Operating Sequences
2.4 Screen layout
4 Channel name
5 Alarm and message line
6 Operating mode display
7 Program name
8 Channel operational
messages
2-46
Name of channel in which program is running.
•
Alarms and messages or
•
References that were inserted in the part program with the MSG
command (if no alarms are active)
The currently selected operating mode, i.e. Jog, MDA or AUTO
(automatic) is displayed.
This program can be executed with Cycle Start.
1 Stop: No NC ready
2 Stop: No mode group ready
3 Stop: Emergency Stop active
4 Stop: Alarm active with stop
5 Stop: M0/M1 active
6 Stop: Block ended in SBL mode
7 Stop: Cycle Stop active
8 Wait: Read-in enable missing
9 Wait: Feedrate enable missing
10 Wait: Remaining dwell time: ... secs
Wait: Aux. funct. ackn. missing
11
12 Wait: Axis enable missing
13 Wait: Exact stop not reached
14 Waiting for positioning axis
15 Waiting for spindle
16 Waiting for other channel
17 Wait: Feedrate override to 0%
18 Stop: Error in NC block
19 Waiting for NC blocks from external
20 Waiting due to SYNACT instruction
21 Wait: Block search active
22 Wait: No spindle enable
23 Wait: Axis feedrate value is 0
24 Waiting for tool change acknowledgement
25 Waiting for gear stage change
26 Waiting for position control
27 Waiting for thread cut
28 Wait:
29 Waiting for punching
30 Waiting for safe operation
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
2
03.04
 Siemens AG, 2004. All rights reserved