Delete Tool - Siemens SINUMERIK 840D Operator's Manual

5
03.04
Go to
Preselect Active
T/D No. T/D No.
or
OK

5.2.5 Delete tool

T No. T No.
+ –
Delete
Delete
tool
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
The new tool is selected and displayed in the "Tool offset" window.
Find tool by selecting softkey "Go to":
Softkey "Go to" opens a window in which you can enter the T or D
number you wish to find or in which you can select the pre-selected or
active tool using the vertical softkeys.
The tool you are searching for is positioned with "OK". Its tool offsets
are then displayed.
Function
The tool is deleted together with all its cutting edges and the tool list
updated accordingly.
Operating sequence
The "Tool offset data" window is displayed automatically.
Scroll until you reach the tool to be deleted.
The vertical softkey bar changes when softkey "Delete" is selected.
Press the "Delete tool" softkey.
The tool and all its edges are deleted. The tool offsets of the tool
number preceding the deleted tool are displayed.
Parameters Operating Area
5.2 Tool offset
5
5-135