Setting The Interface - Siemens SINUMERIK 840D Operator's Manual

7
03.04
7.5.1

Setting the interface

RS 232 C
user
RS 232 C
printer
RS 232 C
PG/PC
Set
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Function
You can output files to an external data storage device or read them
in from there via the RS-232 interface. The RS-232 interface and your
data backup device must be compatible. The control provides you
with an input screen form for this purpose in which you can define the
specific data for your device.
You have the option of selecting three different RS-232 interface
parameter sets:
1. RS-232-C user
2. RS-232-C printer
3. RS-232-C PG/PC
Operating sequence
Select one of the three softkeys for the RS-232 interface. The softkey
remains marked so that you can see what you have selected.
•
RS-232-C user
•
RS-232-C printer
•
RS-232-C PG/PC
Press softkey "Set" if you wish to alter the interface parameters for the
currently selected interface (softkey is highlighted). The name of the
interface to be set up is displayed in the title.
Position the cursor on the input fields and enter the required values.
The values of parameters "Device type", "Baud rate", "Stop bits",
"Parity" and "Data bits" are selected with the "Select key".
You can also activate and deactivate special functions with the "Select
key".
Services Operating Area
7.5 Main services screen
7
7-261