6
Program Operating Area
6.7 Manage programs
6.7.4 Create new workpiece/part program
Workpieces
Parts
programs
Sub-
routines
Standard
cycles
User
cycles
Manufact.
cycles
6-234
Selecting a workpiece/part program
The following subsection describes how you can select workpieces
and part programs in a directory. A selected file can then be called
and edited in the text editor.
Operating sequence
Select workpiece/part program:
•
Workpieces
•
Parts programs
•
Subroutines
If "Logical drives" is configured, cycle softkeys are displayed after you
press the ETC key.
•
Standard cycles
•
User cycles
•
Manufacturer cycles
Position the cursor in the directory on the desired file.
For each file, the file name, file type, length, date of creation/last
change are displayed.
The file display properties can be set.
(See Chapter "Start-Up", "Settings" menu)
Call a part program:
Use the cursor to select a program in the program overview and press
the "Input" key.
The text editor is displayed with the file you have selected.
You can now edit the part program.
Open a workpiece:
The workpiece directory is opened and the programs it contains
displayed on the screen.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
6
03.04
Siemens AG, 2004. All rights reserved