Philips LPC2119 User Manual page 198

Philips Semiconductors
ARM-based Microcontroller
PWM Interrupt Register (PWMIR - 0xE0014000)
The PWM Interrupt Register consists of eleven bits (Table 166), seven for the match interrupts and four reserved for the future
use. If an interrupt is generated then the corresponding bit in the PWMIR will be high. Otherwise, the bit will be low. Writing a
logic one to the corresponding IR bit will reset the interrupt. Writing a zero has no effect.
Table 166: PWM Interrupt Register (PWMIR - 0xE0014000)
PWMIR Function
0 PWMMR0 Interrupt Interrupt flag for PWM match channel 0.
1 PWMMR1 Interrupt Interrupt flag for PWM match channel 1.
2 PWMMR2 Interrupt Interrupt flag for PWM match channel 2.
3 MR3 Interrupt
4 Reserved.
5 Reserved.
6 Reserved.
7 Reserved.
8 PWMMR4 Interrupt Interrupt flag for PWM match channel 4.
9 PWMMR5 Interrupt Interrupt flag for PWM match channel 5.
10 PWMMR6 Interrupt Interrupt flag for PWM match channel 6.
Pulse Width Modulator (PWM)
Interrupt flag for PWM match channel 3.
Application must not write 1 to this bit.
Application must not write 1 to this bit.
Application must not write 1 to this bit.
Application must not write 1 to this bit.
LPC2119/2129/2292/2294
Description
198
Preliminary User Manual
Reset
Value
0
0
0
0
0
0
0
0
0
0
0
January 08, 2004