Ncu/Ppu Access (Package Execution) - Siemens SINUMERIK 840D sl Operating Manual

Display associated system variables button
You open the "NCU/PPU access - System variables" dialog via the button
associated system variables). All system variables to be used under "NCU/PPU access" are
listed here.
Information on the system variables·can be found in the section System variables for the NCU/
PPU access dialog (Page 288).
Further general information on the system variables can be found in the Reference list system
variables (Page 283) section.
Dialog / Operating instructions
You can find additional information on the "Dialog" and "Operating instructions" property
groups under Package configuration (configuration) (Page 121).
Address
The following property is available:
Preselection
Login information
The following settings are available for the "Login information" property:
User name
Password
Dialog scripts
Under "Dialog scripts", entry "Scripts", via the button
access' Edit event scripts". Here you can edit scripts that are to be executed at selectable
times during package processing.
You can find detailed information on the dialog scripts in the section with the same name
"Dialog scripts (Page 115)".
4.4.2.15

NCU/PPU access (package execution)

Dialog view during the package execution (for commissioning engineers / operators)
Execution of the "NCU/PPU access" dialog page cannot be deactivated.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Preselects the IP address of the control (NCU or PPU).
The preselection is relevant only if the package is executed on a Windows sys‐
tem.
For a connection via X120/X127, '192.168.214.1' is always available in the drop-
down list.
Login information (user name, password) can be stored for access to the NCU/
PPU.
In a new project, these are preset to default user, e.g. "manufact" for NCU and
the appropriate password.
Create MyConfig - Expert
4.4 Project folder
(Display
you open the "Dialog 'NCU/PPU
141