Text Formatting Options - Siemens SINUMERIK 840D sl Operating Manual

The following table shows which data is permitted and the point in time up to which it must be
written to ensure it still takes effect:
MD
$MN_SINAMICS_MAX_SLAVE_ADDRESS[0-3]
Example
For the 840D sl, to exclude all CU320-2 DPs beginning at slave address 8 on the
PROFIBUS DP1 (X126) from the automatic device configuration, display and archiving, the
user can apply the function as follows:
Prepare("$MN_SINAMICS_MAX_SLAVE_ADDRESS[0]",7)
Thus, CUs that have been put into operation are excluded from the device configuration to be
carried out by the package.
4.6.10.15

Text formatting options

Programming options
Examples are listed below on how you can format texts.
A selection of text formatting options can be displayed using function InputReal. However,
these formats are possible for all functions, which use text and also for all other user texts in
CMC, for example in notes relating to dialogs and steps.
For formatting, you can use the HTML codes that are supported by Qt.
Example of the representation of a line break
For a clearer arrangement, insert a line break (<br>) between the header and the text.
up.wrap=InputReal("Notice! <br> Please enter a number.",3.0)
Figure 4-87
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Example of the representation of a line break
Create MyConfig - Expert
Latest point in time for a function call
OnInit dialog page system configuration
4.6 Script language
273