Data Access Operations - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.6 Script language
Drive data
Syntax
PS[B<bNr>_S<sNr>_PS<psNr>].<drvData> Value of the SINAMICS drive parameter "drvData" of the
4.6.5

Data access operations

Alternative data access operations
As an alternative to setting a section (Page 242), the section can also be specified directly
using a fully qualified identifier during access.
This section specification has a higher priority compared to the last setting for the section.
Section setting: [C?],[B?_S?_PS??],[ADV], [SL].
Access to NC, DRV and BD data from step and dialog scripts can only be realized using these
fully qualified identifiers.
Overview of data access operations
The following is shown in the subsequent table:
● At which locations of the script processing, data can be read or written and with which
syntax.
● Data and their associated notation are listed as examples.
Table 4-12 Overview of data access operations: Read only/read and write
Data Dialog
access op‐ pages
erations
Dialog
scripts scripts
Read only
244
Cross-area
Step Action
scripts
Fully qualified identifiers for area data NC, DRV, HMI
Description
specified section:
● Bus with the bus number "bNr"
● Slave with the slave number "sNr"
● Drive object with the number "psNr"
Values from 1 to 99 are valid for "psNr".
Leading zeros are not permitted!
Example:
PS[B3_S3_PS1].p105
Step tree
Manipulation tasks
All NC data
NC[C1].$MC_CHAN_NAME
PS[B3_S3_PS3].P105
BD[SL].$MM_SW_OPTIONS
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Area specific
DRV data
Operating Manual, 11/2016, A5E36537479B-AD
BD data