Siemens SINUMERIK 840D sl Operating Manual page 361

Designation
Cut
Copy
Paste
Delete
View
Topology tree
Topology graph
Zoom
Reset graphic
Display modules used
Groups in modules used
Toolbars
Go to error/warning forward
Go to error/warning backward
Data
Manage DO list...
Administrate axis-drive assign‐
ment...
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Meaning
<Ctrl+X> Removes the selected components and copies them to the clip‐
board.
<Ctrl+C> Copies the selected components to the clipboard.
<Ctrl+V> Pastes the components from the clipboard to the selected posi‐
tion.
<Del> Deletes the selected components and any following compo‐
nents connected to the component.
Shows or hides the topology tree.
The topology tree and graphic representation can never be hid‐
den simultaneously.
Shows or hides the graphic topology view.
The topology tree and graphic representation can never be hid‐
den simultaneously.
The topology graph can be zoomed to a desired working size.
The topology graph is reset to the last saved working size.
For the various device classes, shows group titles for the mod‐
ules used or hides these.
For the various device classes, shows group titles in the "Mod‐
ules used" window or hides these.
Standard Allows toolbars to be hidden or displayed.
Quick search
<F8> Errors or warnings can be displayed in succession.
<Shift+F8> Preceding errors or warnings can be displayed.
Ctrl+Alt+D Opens the "DO list" dialog for the administration of DO variables,
i.e. DO variables can be newly added, imported, exported, or
linked.
You can find additional information under Manage DO list
(Page 370).
Ctrl+Alt+A Opens the "Axis-drive assignment - Topo project" dialog, in
which the axis-drive assignment table is shown and an axis-
drive assignment can be performed.
A special feature is the display of the automatically generated
DO variables, which can also be assigned manually.
When moving drive objects (DO), the required calculations are
performed automatically.
It is possible to perform the desired axis-drive assignment man‐
ually.
You will find further information under Axis-drive assignment
(Page 393).
Create MyConfig - Topo
6.3 Overview of user interface
361