4.6.11.6
ExtCall
ExtCall("<path>")
Call of an external manipulation task.
For this task, no verification is performed in Expert and thus no syntax check.
The file must be stored in ANSI code. The path can be specified as an absolute path or relative
path.
A relative path refers to the folder from which the package is executed.
An absolute path must correspond to the conventions of the runtime system.
4.6.11.7
Return
Return()
This procedure can be used in all scripts.
The procedure Return leads to a termination of the script processing in the current script: Event
script, Step script, action script and job.
Further information on dialog scripts (Page 115) and step scripts (Page 202).
4.6.11.8
Skip
Skip()
This procedure can be used in the dialog and step scripts.
Further information on dialog scripts (Page 115) and step scripts (Page 202).
The procedure Skip() is used to skip a dialog page.
Note
Exception
The dialog pages Archive access, NCU access, PCU access and System configuration are
not skipped if Yes" is set in the Package tab under Package > Data areas > Use archive.
In this case, an error message is output during package processing respectively during the
verification run in Expert.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Create MyConfig - Expert
4.6 Script language
281