Siemens SINUMERIK 840D sl Operating Manual page 379

Switch Arguments
/autocom‐ -
plete
/log <Log file>
Return values
Note
The return values for the Topo command line call only apply if Topo is executed in /silent mode
without the user interface.
The return values from Topo can be determined by interrogating variable %ERRORLEVEL%,
see the following example.
Table 6-2
Value
0
1
2
3
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Optional
Yes
Yes
Topo return values
Description
No faults or alarms occurred when checking/deploying the project.
Alarms but no faults occurred when checking/deploying the project.
Faults (and possibly alarms) occurred when checking/deploying the project.
Command line call error.
Description
● Automatically adds missing component numbers and
DO properties and sets up standard encoder
assignments if none have been specified.
● Specifies the path of a log file in either absolute or
relative terms.
● Alarms and faults are written to the log file (XML
format) when checking and deploying the package.
● Specification of this switch with its parameter is
optional.
Create MyConfig - Topo
6.5 Command line call
379