Siemens SINUMERIK 840D sl Operating Manual page 371

Property
DO No.
DO name
Description
DO type
DO type
SINAMICS S
Integrated (NCU)
Extended (NX)
Determine INFEED from HW
ACTIVE INFEED CONTROL
SMART INFEED CONTROL
BASIC INFEED CONTROL
Servo (11) - servo, servo HF
Servo HLA (70) - servo HLA
Determine TM from HW
TM31
TM41
TM15
TM120
TB30
DMC20 / DME20
CU-LINK
Number of components
Restrictions with regard to the number of components that can be assigned a DO also apply.
Only the following assignments are permitted:
DO type
SINAMICS S (CU320)
Integrated (NCU)
Extended (NX)
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Description
DO number via which a drive object is addressed. Only numbers between 2 and 54 as well as 61
Freely selectable name for a drive object.
Freely selectable description text for the DO var‐
iable.
Component type
CU320, all variants
NCU, all variants
NX, all variants
Line module
Voltage sensor module
Note
and 62 are permitted.
For Control Units (CU_I, NX) only a "1" is per‐
missible.
The DO number 63 is reserved for DO number-
independent BICO connections within a DO.
The numbers 55 to 60 are reserved for "CU-
LINK" DOs.
Max. 25 characters.
-
Module assignment
Control Unit
Line module
Servo, Servo HF
Terminal module
Terminal Board
Hub Module
-
Create MyConfig - Topo
6.4 Topo - operation
Permitted number
1
1
1
1
1
371