Siemens SINUMERIK 840D sl Operating Manual page 378

Create MyConfig - Topo
6.5 Command line call
Parameter
Significance of the switch
Table 6-1 Topo parameter
Switch Arguments
- <Topology path>
/diff <file1>
<file2>
/silent -
/deploy <Deploy name>
/deploydir <Deploy directory >
/target (UST|UTZ27|UTZ44|UTZ45|
UTZ47)
378
Optional Description
No
● Specifies the path of the project file – either absolute
or relative.
● The path must be specified in double inverted commas
if spaces are included in it.
Example: "C:\Path with spaces\package file"
● For topology projects (*.uptz), the name of the topology
to be compared must be specified separately behind
the path with a colon.
If no name is specified, the first topology contained in
the project is selected.
● Uptz, ust, utz, and xml files according to the Topo
interface description as well as SINUMERIK archives
are permissible.
No
● Two paths to uptz, ust, utz, arc files.
● For topology projects (*.uptz), the name of the topology
to be compared must be specified separately after the
path with a colon.
No
● The graphical user interface of Create MyConfig Topo
is hidden.
● The following options are only effective with this switch.
No
● Causes the topology selected in the project to be
checked and deployed.
● If the parameter is not specified, then Topo generates
the name from <Topology path>.
Yes
● Specifies the deployment path, absolute or relative, in
which the topology is to be deployed.
● The path must be specified in double inverted commas
if spaces are included in it.
Example: "C:\path with spaces"
● If the switch is not specified, then Topo uses the
<Topology path> folder.
No
● Deployment type and CNC software version of the
NCU, on which the user-defined topology is applied.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD