Siemens SINUMERIK 840D sl Operating Manual page 33

Configurations shown in gray are user-specified configurations; these can be changed, but not
deleted - and can be restored again at any time.
②
Buttons for managing the configurations
Configurations can be managed using these buttons.
Using "Add", a new configuration is generated which can also be adapted.
A copy of the selected comparison configuration is created by clicking "Duplicate".
With "Restore user-specified setting", the changes to the specified comparison configuration
are undone.
Note
The "Restore user-specified setting" button is only active if a user-specified configuration has
been selected the contents of which are no longer the same as the default setting.
In addition to restoring the default setting, this button can also be used to check whether the
contents are identical with those of the default setting.
③
Main nodes in the structure tree
The properties that belong to the selected configuration are saved in this area of the
Configuration dialog; these properties include display criteria, filter criteria and a comment.
④
Background color
So that the user can immediately recognize how to select certain comparison configurations,
a separate background color can be defined for each comparison configuration.
Display tab
Under the "Display" tab, you can define which main nodes should be displayed in the data
structure tree, assuming that data is available in the comparison object (archive or file) for this
main node.
Further, you can define whether the data should be sorted in alphabetic order or similar to that
used in an NC in the data list.
Expert list tab
Using the Expert list , you can specify a (large) number of identifiers that should either be
included or excluded for the comparison.
Contrary to the functionality for filters, the identifiers must be completely specified. The only
exception is the field data in the identifier.
Example:
An entry "$MA_CTRLOUT_NR[0]" in an inclusion list precisely includes this identifier.
An entry "$MA_CTRLOUT_NR" in an inclusion list includes all identifiers that belong to this
field, i.e. "$MA_CTRLOUT_NR[0]" and "$MA_CTRLOUT_NR[1]".
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
Create MyConfig - Diff
3.3 SINUMERIK archive comparison
33