Siemens SINAMICS G130 Operating Instructions Manual page 143

Configuring the drive unit properties
Figure 5-16
⇒ Under Standard:, choose the appropriate standard for your motor,
whereby the following is defined:
● IEC motor (50 Hz, SI unit): Line frequency 50 Hz, motor data in kW
● NEMA motor (60 Hz, US unit): Line frequency 60 Hz, motor data in hp
⇒ Under Connection voltage:, enter the appropriate connection voltage of the device.
⇒ Click Continue >
The connected motor can be selected and/or entered in different ways:
● by selecting a standard motor from a list
● by entering the motor data.
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
Configuring the drive unit properties
5.3 Procedure for commissioning via STARTER
Commissioning
143