Siemens SINAMICS G130 Operating Instructions Manual page 568

Technical specifications
12.3 Technical specifications
Article number
Recommended fuses
- Line protection
without semiconductor protection
Rated current
frame size to IEC 60269
- Line and semiconductor protection
Rated current
Frame size to IEC 60269
Minimum short-circuit current
Rated output of a typ. 6-pole standard induction motor based on I
1)
Rated output of a typ. 6-pole standard induction motor based on I
2)
The base-load current I
3)
(see "Overload capability").
The base-load current I
4)
(see "Overload capability").
If the auxiliary supply is to be fed in separately from the load supply, e.g., if the control should be able to continue com-
5)
munication if the line voltage fails.
It is mandatory that the specified fuses are used to achieve a UL-approved system.
6)
The minimum current required to reliably trigger 3NE1 protective devices.
7)
568
6SL3310-
A
6)
A
A
7)
is based on a duty cycle of 110% for 60 s or 150% for 10 s with a duty cycle duration of 300 s
L
is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s
H
1GE37-5AAx 1GE38-4AAx
3NA3475 3NA3365
800 2 x 500
4 3
3NE1448-2 3NE1436-2
850 2 x 630
3 3
10500 16,000
or I at 400 V 3 AC 50 Hz.
L H
or I at 460 V 3 AC 60 Hz.
L H
Operating Instructions, 07/2016, A5E00331449A
1GE41-0AAx
3NA3472
2 x 630
3
3NE1437-2
2 x 710
3
18400
Inverter chassis units