Profienergy - Siemens SINAMICS G130 Operating Instructions Manual

Operation
6.8 Communication via PROFINET IO
Control Unit with CBE20
The CBE20 Communication Board can be optionally inserted into Control Unit CU320-2 PN
or CU320-2 DP:
● The CBE20 Communication Board is a PROFINET switch with 4 additional PROFINET
ports.
Note
PROFINET routing
Routing is neither possible between the onboard interfaces X127 and X150 of the CU320-2
PN, nor between the onboard interfaces of the CU320-2 PN and an inserted CBE20.
6.8.4

PROFIenergy

6.8.4.1 Description
PROFIenergy is an energy management system for production plants, based on the
PROFINET communication protocol. The functionality is certified in the PROFIenergy profile
of the PNO. Drive units which have PROFIenergy functionality, can be certified in an
approved laboratory. Certified devices support the PROFIenergy commands and respond
accordingly to the requirements and operating states.
SINAMICS supports PROFIenergy profile V1.1. PROFIenergy commands are transferred
from the controller to the drive with PROFINET data sets in acyclic operation. The
PROFIenergy commands are transferred using the PROFINET data set 0x80A0.
The following table provides an overview of the PROFIenergy functionality and the support of
the various SINAMICS devices:
262
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A