9.2.23.2
Starting the web server
Preconditions
● The web server is already active in the factory settings.
● A functional commissioned drive project.
● PG/PC is connected to the Control Unit (to the target device).
Starting the web server
1. Enter the IP address of the SINAMICS drive in the address line of the Internet browsers
(e.g. http://169.254.11.22).
Confirm with <Return>.
The start page of the Web server opens. The most important data of your drive is
displayed.
Figure 9-10
Start page of the web server
2. Enter the login name (e.g. SINAMICS) top left and the password if necessary.
In the factory setting, only the "SINAMICS" user is enabled, a password is not allocated.
3. Click "Login" to confirm the input.
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
Functions, monitoring, and protective functions
9.2 Drive functions
445