Tm31 Digital Outputs - Siemens SINAMICS G130 Operating Instructions Manual

Converter built-in units 75 kw-800 kw

Hide thumbs Also See for SINAMICS G130:

Table of Contents

TM31 digital outputs

Four bi-directional digital outputs (terminal X541) and two relay outputs (terminal X542) are

available on the optional TM31 terminal block module. These outputs are, for the most part,

freely parameterizable.

Preconditions

● The Power Module, CU320, and TM31 have been correctly installed.

● The "TM31 terminals" or "Profidrive+TM31" default setting was chosen during

commissioning:

Signal flow diagram

Inverter chassis units

Operating Instructions, 07/2016, A5E00331449A

Set TM31.AO_char. y1 to 0 mA.

Set TM31.AO_char. x2 to 100.00%.

Set TM31.AO_char. y2 to 20 mA.

"TM31 terminals" or "Profidrive+TM31"

"2: TM31 terminals" or "4: Profidrive+TM31"

Signal flow diagram: Digital outputs

Output terminals

8.3 TM31 digital outputs