Siemens SINAMICS G130 Operating Instructions Manual page 293

Table 6- 42
No.
1
2
3
4
5
6
10
11
Link Object, Instance Number: F6 hex
Supported services
Class
Table 6- 43
No.
1
2
3
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
Instance Attribute
Service Type Name
get UNIT32 Status
get UNIT32 Configuration
Capability
get, set UNIT32 Configuration
Control
get, set UNIT16 Path Size (in
WORDs)
UNIT8 Path
get, set STRING Interface Configu-
ration
UNIT32
get, set UNIT16 Host Name
STRING
get, set UNIT8 Select ACD
get, set UNIT8 Last Conflict De-
tected
UNIT8
UNIT8
• Get Attribute all
• Get Attribute single
Class Attribute
Service Type
get UINT16
get UINT16
get UINT16
Value/explanation
Fixed value: 1 hex
1: Configuration acknowledged, by DHCP or
saved values
Fixed value: 94 hex
4 hex: DHCP supported,
10 hex: Configuration can be adjusted,
80 hex: ACD-capable
1 hex: Saved values
3 hex: DHCP
Fixed value: 2 hex
20 hex,
F6 hex,
24 hex,
05 hex, where 5 hex is the number of instances of
F6 hex (four physical ports plus one internal port).
r61000: name of station
r61001: IP address
Host Name Length
-
local OM flash:
0: Disabled,
1: Enabled
local OM flash ACD Activity
local OM flash Remote MAC
local OM flash ARP PDU
Instance
Name
Revision
Max Instance
Num of Instances
6.10 Communication via EtherNet/IP
• Get Attribute all
• Get Attribute single
• Set Attribute single
Operation
293