Replacing Access Control Components; Optional) Replacing An End Door Card Reader - Huawei FusionModule 1000A40 Maintenance Manual

FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
Step 7 Configure the RH2288 server by referring to the management system initial configuration
table.
----End
Follow-up Procedure
Dispose of the removed RH2288 server that is confirmed faulty.

5.3.8 Replacing Access Control Components

5.3.8.1 (Optional) Replacing an End Door Card Reader

Prerequisites



Impact on the System
None
Preparations
Tools: adjustable wrench, Phillips screwdriver, protective gloves
Materials: spare access card and card reader
Document: initial configuration parameters for the management system
Skill requirement: weak-current engineer
Procedure
Step 1 Use a Phillips screwdriver to remove the baffle plate from the access card reader on the
interior wall of the pre-fab. module.
Issue 04 (2018-01-05)
If the RH2288 server indicator is green, the RH2288 server is working properly.
Install the card reader on the main entrance to the pre-fab. module.
A card reader needs to be replaced.
A spare card reader of the same model is available and functional.
For the tables, see the initial configuration parameter manual for the solution in use.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
96