Replacing Batteries For The Extinguishant Control Panel (Ce) - Huawei FusionModule 1000A40 Maintenance Manual

FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
----End
Follow-up Procedure
Dispose of the removed extinguishant control panel that is confirmed faulty.

5.5.9 Replacing Batteries for the Extinguishant Control Panel (CE)

Prerequisites
Spare extinguishant control panel batteries of the same model are available and functional.
Impact on the System
None
Preparations
Tools: protective gloves, step ladder
Materials: spare extinguishant control panel batteries
Documents: fire extinguishing device layout diagram (CE)
Skill requirement: fire engineer
Procedure
Step 1 Remove the battery cables from the extinguishant control panel.
Step 2 Remove the faulty extinguishant control panel batteries.
Issue 04 (2018-01-05)
If the power indicator is on and the alarm indicator is off, the fire control panel is working properly.
For the diagrams, see the initial configuration parameter manual for the solution in use.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
151