Table of Contents
Advertisement
FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
Materials: spare access card, card reader
Documents required: none
Skill requirement: weak-current engineer
Procedure
Step 1 Open the door of the cared reader box.
Step 2 Remove the two screws at the bottom of the card reader, and remove the front cover.
Figure 5-23 Removing the front cover
Step 3 Remove the two screws that secure the card reader body.
Figure 5-24 Removing screws
Step 4 Remove interconnection terminals from the card reader, and remove the card reader body.
Step 5 Remove the two screws from the bottom of the new card reader, and remove the front cover.
Step 6 Reconnect the interconnection terminals, and close the door of the card reader box.
Step 7 Check that the new card reader is working properly.
Issue 04 (2018-01-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
98
Advertisement
Table of Contents
