Table of Contents
Advertisement
FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
Figure 5-14 Replacing a door status sensor
Step 3 Install a new door status sensor, and reconnect the cables.
Step 4 Check that the new door status sensor is working properly.
----End
Follow-up Procedure
Dispose of the removed door status sensor that is confirmed faulty.
5.3.3 Replacing a Camera
Prerequisites
Impact on the System
None
Preparations
Tools: Phillips screwdriver, flat-head screwdriver, step ladder, protective gloves
Materials: spare camera
Documents: documents delivered with the camera, initial configuration parameters for the
management system
Skill requirement: weak-current engineer
Issue 04 (2018-01-05)
Open the door and check whether the management system reports an alarm indicating that the door was
opened. If yes, the door status sensor is working properly.
A camera needs to be replaced.
A spare camera of the same model is available and functional.
For the tables, see the initial configuration parameter manual for the solution in use.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
88
Advertisement
Table of Contents
