Table of Contents
Advertisement
FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
Figure 5-97 Removing the extinguishant control panel
Step 6 Install the new extinguishant control panel in the same position.
Step 7 Put the corrugated pipes and cables back to the box, and reconnect the cables according to
labels.
Step 8 Put the batteries to the same position.
Step 9 Switch on the input circuit breaker of the extinguishant control panel, and connect the battery
cables.
Step 10 Check whether the new extinguishant control panel is working properly.
----End
Follow-up Procedure
Dispose of the removed extinguishant control panel that is confirmed faulty.
5.6.11 Replacing an Emergency Light (CE)
Prerequisites
A spare emergency light of the same model is available and functional.
Impact on the System
None
Issue 04 (2018-01-05)
If the power indicator is on and the alarm indicator is off, the fire control panel is working properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
174
Advertisement
Table of Contents
