Replacing An Emergency Light (Standard) - Huawei FusionModule 1000A40 Maintenance Manual

FusionModule1000A40 IT Solution
Maintenance Guide (2016.05, AI Version)
Figure 5-62 Installing the battery fixing plate
Step 11 Switch on the circuit breaker for the fire extinguishing PDB.
Step 12 Switch on the active and standby power supplies to the fire alarm control panel.
Step 13 Check whether the new fire alarm control panel is working properly.
----End
Follow-up Procedure
Dispose of the removed fire alarm control panel that is confirmed faulty.

5.4.11 Replacing an Emergency Light (Standard)

Prerequisites
A spare emergency light of the same model is available and functional.
Impact on the System
None
Preparations
Tools: step ladder, protective gloves, Phillips screwdriver
Materials: spare emergency light
Documents: power supply and distribution system diagram
Skill requirement: fire engineer
Issue 04 (2018-01-05)
If the power indicator is on and the alarm indicator is off, the fire alarm control panel is working
properly.
For the diagrams, see the initial configuration parameter manual for the solution in use.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Components Replacement
132