Siemens SINUMERIK 840D sl Programming Manual page 214

File and Program Management
2.2 Working memory (CHANDATA, COMPLETE, INITIAL)
Initialization programs
These are programs with which the working memory data is initialized. The following file
types can be used for this:
File type
name_TEA
name_SEA
name_TOA
name_UFR
name_INI
name_GUD
name_RPA
Data areas
The data can be organized in different areas in which they are to apply. For example, a
control can have several channels or, as is commonly the case, several axes at its disposal.
There are:
Identifier
NCK
CH<n>
AX<n>
TO
COMPLETE
Create initialization program at an external PC
The data area identifier and the data type identifier can be used to determine the areas
which are to be treated as a unit when the data is saved:
_N_AX5_TEA_INI
_N_CH2_UFR_INI
_N_COMPLETE_TEA_INI
When the control is started up initially, a set of data is automatically loaded to ensure proper
operation of the control.
214
Description
Machine data
Setting data
Tool offsets
Zero offsets/frames
Initialization files
Global user data
R-parameters
Data areas
NCK-specific data
Channel-specific data (<n> specifies the channel name)
Axis-specific data (<n> specifies the number of the machine axis)
Tool data
All data
Machine data for axis 5
Frames of channel 2
All machine data
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Job Planning