Siemens SINUMERIK 840D sl Programming Manual page 711

No. Param Param
mask internal
_AMODE
31
32 _PK
33 DCH _DCH
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Explanation
Alternative mode
UNITS: Select infeed
0 = DX and DZ infeed for stock removal parallel to contour
1 = D infeed
TENS: Infeed strategy
0 = Variable cutting depth (90 ... 100%)
1 = Constant cutting depth
HUNDREDS: Cut segmentation
0 = Uniform
1 = Align to edges
THOUSANDS: Select contour allowance U1, double finishing
0 = No
1 = Yes
TEN THOUSANDS: Update selection of blank
0 = No
1 = Yes
HUNDRED THOUSANDS: Select allowance on blank XD
0 = Absolute, value of transverse axis in the diameter
1 = Incremental, value of transverse axis in the radius
ONE MILLION: Select allowance on blank ZD
0 = Absolute
1 = Incremental
TEN MILLION: Select limit 2 XB
0 = Absolute, value of transverse axis in the diameter
1 = Incremental, value of transverse axis in the radius
HUNDRED MILLION: Select limit 2 ZB
0 = Absolute
1 = Incremental
BILLION
0 = Leading channel
1 = Following channel
Number of the partner channel if there are more than two channels available at the
machine.
Channel offset
Programming cycles externally
18.1 Technology cycles
711