Tool Offset: Taking Into Consideration A Limitation Surface (Cut3Dcc, Cut3Dccd) - Siemens SINUMERIK 840D sl Programming Manual

Tool offsets
9.5 Activate 3D tool offsets (CUT3DC..., CUT3DF...)
9.5.7 3D tool offset: Taking into consideration a limitation surface (CUT3DCC,
CUT3DCCD)
Function
3D circumferential milling with real tools
In 3D circumferential milling with a continuous or constant change in tool orientation, the tool
center point path is frequently programmed for a defined standard tool. Because in practice
suitable standard tools are often not available, a tool that does not deviate too much from a
standard tool can be used.
CUT3DCCD
standard tool would define. The NC program defines the center-point path of a standard tool.
CUT3DCC
programmed standard tool would have reached. The NC program defines the contour on the
machining surface.
Syntax
CUT3DCCD
CUT3DCC
Meaning
CUT3DCCD
CUT3DCC
Note
Tool radius compensation with G41, G42
If tool radius compensation with
the option "orientation transformation" must also be active.
414
takes account of a limitation surface for a real differential tool that the programmed
with the use of cylindrical tools takes account of a limitation surface that the
Activation of the 3D tool offset for the circumferential milling with limitation
surfaces with a differential tool on the tool center point path: Infeed to the
limitation surface.
Activation of the 3D tool offset for circumferential milling with limitation
surfaces with 3D radius compensation: Contour on the machining surface
, is programmed when
G41 G42
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
or is active,
CUT3DCCD CUT3DCC
Job Planning