Siemens SINUMERIK 840D sl Programming Manual page 721

Operation Type
1)
for explanations, see legend (Page 776).
1) 2) 3) 4) 5)
AXTOSPI F
B A
B2 A
B3 A
B4 A
B5 A
B_AND O
B_OR O
B_NOT O
B_XOR O
BAUTO G
BLOCK K
BLSYNC K
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Meaning
Converts axis identifier into a
spindle index
Axis name
Tool orientation: RPY or Euler
angle
Tool orientation: Direction/surface
normal vector component
Tool orientation: Surface normal
vector for beginning of block
Tool orientation: Surface normal
vector for end of block
Bit-by-bit AND
Bit-by-bit OR
Bit-by-bit negation
Bit-by-bit exclusive OR
Definition of the first spline section
by means of the next 3 points
Together with the keyword TO
defines the program part to be
processed in an indirect
subprogram call
Processing of interrupt routine is
only to start with the next block
change
W TP SA Description see
2) 3) 4)
PGAsl
+ -
Axis functions (AXNAME, AX, SPI,
AXTOSPI, ISAXIS, AXSTRING,
MODAXVAL) (Page 583)
PGAsl
m/s +
Programming the tool orientation (A...,
B..., C..., LEAD, TILT) (Page 313)
PGAsl
s +
Programming the tool orientation (A...,
B..., C..., LEAD, TILT) (Page 313)
PGAsl
s +
Programming the tool orientation (A...,
B..., C..., LEAD, TILT) (Page 313)
PGAsl
s +
Face milling (A4, B4, C4, A5, B5, C5)
(Page 319)
PGAsl
s +
Face milling (A4, B4, C4, A5, B5, C5)
(Page 319)
PGAsl
+
Comparison and logic operations
(Page 71)
PGAsl
+
Comparison and logic operations
(Page 71)
PGAsl
+
Comparison and logic operations
(Page 71)
PGAsl
+
Comparison and logic operations
(Page 71)
PGAsl
m +
Spline interpolation (ASPLINE,
BSPLINE, CSPLINE, BAUTO, BNAT,
BTAN, EAUTO, ENAT, ETAN, PW, SD,
PL) (Page 230)
+ PGAsl
Indirect subprogram call with
specification of the calling program part
(CALL BLOCK ... TO ...) (Page 194)
PGAsl
+
Assign and start interrupt routine
(SETINT, PRIO, BLSYNC) (Page 124)
Tables
19.1 Operations
5)
721