Siemens SINUMERIK 840D sl Programming Manual page 31

<limit values>
<access rights>
<init_time>
<init_value>
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
: Lower/upper limit
<limit value>:
LLI
<limit value>:
ULI
See "Attribute: Limit values (LLI, ULI) (Page 35)"
Note
Cannot be redefined for:
 System variables
 Global user data (GUD) of the data types:
FRAME
: Access rights for reading/writing via part program or OPI
<protection level>: Execute: NC language element
APX
<protection level>: Read: Part program
APRP
<protection level>: Write: Part program
APWP
<protection level>: Read: OPI
APRB
<protection level>: Write: OPI
APWB
<protection level>:
See "Attribute: Access rights (APR, APW, APRP, APWP, APRB,
APWB) (Page 39)"
: Point in time at which the variable is reinitialized
:
INIPO
:
INIRE
:
INICF
:
PRLOC
See "Attribute: Initialization value (Page 32)"
: Initialization value
When redefining the initialization value, an initialization time
always has to be specified also (see <init_time>).
See "Attribute: Initialization value (Page 32)"
For the Initialization of array variables see "Definition and
initialization of array variables (DEF, SET, REP) (Page 45)"
Note
Cannot be redefined for system variables, except setting data.
Lower limit value (lower limit)
Upper limit value (upper limit)
Range of values: 0 ... 7
Power On
End of main program, NC reset or Power On
NewConfig or end of main program, NC reset or
Power On
End of main program, NC reset following local
change or Power On
Flexible NC programming
1.1 Variables
, ,
BOOL AXIS STRING
,
31