Siemens SINUMERIK 840D sl Programming Manual page 732

Tables
19.1 Operations
Operation Type
1)
for explanations, see legend (Page 776).
1) 2) 3) 4) 5)
CTABUNLOCK P
CTOL K
CTRANS F
CUT2D G
6)
CUT2DF G
CUT3DC G
CUT3DCC G
CUT3DCCD G
CUT3DF G
CUT3DFF G
CUT3DFS G
CUTCONOF G
6)
CUTCONON G
CUTMOD K
CYCLE60 C
CYCLE61 C
732
Meaning
Revoke delete and overwrite lock
Contour tolerance for compressor
functions, orientation smoothing
and smoothing types
Zero offset for multiple axes
2D tool offset
2D tool offset The tool offset is
applied relative to the current
frame (inclined plane).
3D tool offset circumferential
milling
3D tool offset circumferential
milling with limitation surfaces
3D tool offset circumferential
milling with limitation surfaces
with differential tool
3D tool offset face milling
3D tool offset face milling with
constant tool orientation
dependent on active frame
3D tool offset face milling with
constant tool orientation
independent of active frame
Constant radius compensation
OFF
Constant radius compensation
ON
Activate "Modification of the offset
data for rotatable tools"
Engraving cycle
Face milling
W TP SA Description see
2) 3) 4)
PGAsl
+ +
Locking curve tables to prevent deletion
and overwriting (CTABLOCK,
CTABUNLOCK) (Page 509)
PGAsl
+
Programmable contour/orientation
tolerance (CTOL, OTOL, ATOL)
(Page 488)
PGAsl
+ -
Coarse and fine offsets (CFINE,
CTRANS) (Page 284)
PGsl
m +
PGsl
m +
PGAsl
m +
Activate 3D tool offsets (CUT3DC...,
CUT3DF...) (Page 404)
PGAsl
m +
3D tool offset Taking into consideration a
limitation surface (CUT3DCC,
CUT3DCCD) (Page 414)
PGAsl
m +
3D tool offset Taking into consideration a
limitation surface (CUT3DCC,
CUT3DCCD) (Page 414)
PGAsl
m +
Activate 3D tool offsets (CUT3DC...,
CUT3DF...) (Page 404)
PGAsl
m +
Activate 3D tool offsets (CUT3DC...,
CUT3DF...) (Page 404)
PGAsl
m +
Activate 3D tool offsets (CUT3DC...,
CUT3DF...) (Page 404)
PGsl
m +
PGsl
m +
PGAsl
+
Cutting data modification for tools that
can be rotated (CUTMOD) (Page 439)
PGAsl
+
Engraving cycle - CYCLE60 (Page 683)
PGAsl
+
Face milling - CYCLE61 (Page 661)
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
5)
Job Planning