Frames Active In The Channel - Siemens SINUMERIK 840D sl Programming Manual

Coordinate transformations (frames)
5.7 NCU global frames
5.7.2

Frames active in the channel

Function
Frames active in the channel are entered from the part program via the relevant system
variables of these frames. This also includes system frames. The current system frame can
be read and written in the part program via these system variables.
Frames currently active in the channel
Overview
Current system frames
$P_PARTFRAME
$P_SETFRAME
$P_EXTFRAME
$P_NCBFRAME[n]
$P_CHBFRAME[n]
$P_BFRAME
$P_ACTBFRAME
$P_CHBFRMASK and $P_NCBFRMASK
$P_IFRAME
Current system frames
$P_TOOLFRAME
$P_WPFRAME
$P_TRAFRAME
$P_PFRAME
Current system frame
$P_CYCFRAME
P_ACTFRAME
FRAME chaining
$P_NCBFRAME [n] Current NCU global basic frames
System variable $P_NCBFRAME[n] can be used to read and write the current global basic
frame field elements. The resulting total basic frame is calculated by means of the write
process in the channel.
The modified frame is activated only in the channel in which the frame was programmed. If
the frame is to be modified for all channels of an NCU, $P_NCBFR[n] and
$P_NCBFRAME[n] must be written simultaneously. The other channels must then activate
the frame, e.g. with G54. Whenever a basic frame is written, the complete basic frame is
calculated again.
294
For:
TCARR and PAROT
Preset actual value memory and
scratching
External zero offset
Current NCU global basic frames
Current channel basic frames
Current first basic frame in the channel
Complete basic frame
Complete basic frame
Current settable frame
For:
TOROT and TOFRAME
Workpiece reference points
Transformations
Current programmable frame
For:
Cycles
Current total frame
Current frame is made up of the
complete basic frame
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Job Planning