Boring - Cycle86 - Siemens SINUMERIK 840D sl Programming Manual

Programming cycles externally
18.1 Technology cycles
18.1.6

Boring - CYCLE86

Programming
CYCLE86(REAL RTP, REAL RFP, REAL SDIS, REAL DP, REAL DPR, REAL DTB,
INT SDIR, REAL RPA, REAL RPO, REAL RPAP, REAL POSS, INT _GMODE, INT
_DMODE, INT _AMODE)
Parameters
No. Param Param
mask internal
RP RTP
1
Z0 RFP
2
3 SC SDIS
4 Z1 DP
5 Z1 DPR
6 DT DTB
DIR SDIR
7
8 DX RPA
DY RPO
9
DZ RPAP
10
11 SPOS POSS
12 _GMODE
13 _DMODE
14 _AMODE
648
Explanation
Retraction plane (abs)
Reference point (abs)
Safety clearance (to be added to reference point, enter without sign)
Drilling depth (abs), see _AMODE
Drilling depth (inc), see _AMODE
Dwell time at final drilling depth, see _AMODE
Direction of spindle rotation
3 = M3
4 = M4
Lift-off distance in X direction
Lift-off distance in the Y direction
Lift-off distance in the Z direction
Spindle position for lift-off (for oriented spindle stop, in degrees)
Geometrical mode
UNITS: Lift mode
0 = Lift off, compatibility
1 = Do not lift off
Display mode
UNITS: Machining plane G17/G18/G19
0 = Compatibility, the plane effective before cycle call remains active
1 = G17 (only active in the cycle)
2 = G18 (only active in the cycle)
3 = G19 (only active in the cycle)
Alternative mode
UNITS: Drilling depth Z1 (abs/inc)
0 = Compatibility, from DP/DPR programming
1 = Incremental
2 = Absolute
TENS: Dwell time at final drilling depth DT in seconds/revolutions
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Job Planning