Kinematic Transformation; Milling On Turned Parts (Transmit) - Siemens SINUMERIK 840D sl Programming Manual

6.8

Kinematic transformation

6.8.1

Milling on turned parts (TRANSMIT):

Function
The TRANSMIT command activates the transformation to the face side machining at lathes.
X
Y
Z
XM
ZM
CM
References
For detailed information about the TRANSMIT function, please refer to:
Function Manual, Extended Functions; Chapter "Kinematic Transformation" > "Face side
transformation TRANSMIT"
Syntax
TRANSMIT
TRANSMIT(n)
TRAFOOF
Job Planning
Programming Manual, 03/2013, 6FC5398-2BP40-3BA1
Geometry axis
Geometry axis
Geometry axis
Machine axis
Machine axis
Machine axis
Transformations
6.8 Kinematic transformation
347