Kinematic Transformation; Milling On Turned Parts (Transmit) - Siemens SINUMERIK 840D sl Programming Manual

6.8

Kinematic transformation

6.8
6.8.1

Milling on turned parts (TRANSMIT)

Function
The TRANSMIT function enables the following:
● Face machining on turned parts in the turning clamp (drill-holes, contours).
● A cartesian coordinate system can be used to program these machining operations.
● The control maps the programmed traversing movements of the Cartesian coordinate
● A tool center offset relative to the turning center is permitted.
● The velocity control makes allowance for the limits defined for the rotations.
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
system onto the traversing movements of the real machine axes (standard situation):
– Rotary axis
– Infeed axis perpendicular to rotary axis
– Longitudinal axis parallel to rotary axis
– The linear axes are positioned perpendicular to one another.
Transformations
6.8 Kinematic transformation
409