Conditionally Interruptible Program Sections (Delayfston, Delayfstof) - Siemens SINUMERIK 840D sl Programming Manual

Job planning
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

8.4
Conditionally interruptible program sections (DELAYFSTON,
8.4
DELAYFSTOF)
Function
Conditionally interruptible part program sections are called stop delay sections. No stopping
should occur and the feed should not be changed within certain program sections.
Essentially, short program sections - e.g. for machining a thread - should be protected from
almost all stop events. Stops do not take effect until the program section has been
completed.
Syntax
DELAYFSTON
DELAYFSTOF
The commands are programmed separately in a part program line.
Both commands are only permitted in part programs but not in synchronous actions.
Significance
DELAYFSTON
DELAYFSTOF
Note
For machine data MD11550 $MN_STOP_MODE_MASK Bit 0 = 0 (default), a stop delay
section is implicitly defined if G331/G332 is active and a path motion or G4 is
programmed.
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0

8.4 Conditionally interruptible program sections (DELAYFSTON, DELAYFSTOF)

Define a start of a range in which "soft" stops are delayed up to the
end of the stop delay section.
Define the end of the stop delay section
Path traversing behavior
543

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828dSinumerik 840de sl

Table of Contents