Siemens SINUMERIK 840D sl Programming Manual page 938

Glossary
Transformation
Additive or absolute zero offset of an axis.
Traversing range
The maximum permissible travel range for linear axes is ± 9 decades. The absolute value
depends on the selected input and position control resolution and the unit of measurement
(inch or metric).
User memory
All programs and data, such as part programs, subroutines, comments, tool offsets, and zero
offsets/frames, as well as channel and program user data, can be stored in the shared CNC
user memory.
User program
User programs for the S7-300 automation systems are created using the programming
language STEP 7. The user program has a modular layout and consists of individual blocks.
The basic block types are:
● Code blocks
● Data blocks
User-defined variable
Users can declare their own variables for any purpose in the → part program or data block
(global user data). A definition contains a data type specification and the variable name. See
→ System variable.
Variable definition
A variable definition includes the specification of a data type and a variable name. The
variable names can be used to access the value of the variables.
Velocity control
In order to achieve an acceptable traverse rate in the case of very slight motions per block,
an anticipatory evaluation over several blocks (→ Look Ahead) can be specified.
938
These blocks contain the STEP 7 commands.
These blocks contain constants and variables for the STEP 7 program.
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
Job Planning