Deleting The Definition Of An Electronic Gear (Egdel); Rotational Feedrate (G95) / Electronic Gear (Fpr) - Siemens SINUMERIK 840D sl Programming Manual

9.4.4

Deleting the definition of an electronic gear (EGDEL)

Function
An EG axis group must be switched-out before its definition can be deleted.
Programming
Syntax
EGDEL(following
axis)
9.4.5

Rotational feedrate (G95) / electronic gear (FPR)

Function
The FPR command can be used to specify the following axis of an electronic gear as the
axis, which determines the revolutional feedrate. Please note the following with respect to
this command:
● The feedrate is determined by the setpoint velocity of the following axis of the electronic
● The setpoint velocity is calculated from the speeds of the leading spindles and modulo
● Speed parts of linear or non-modulo leading axes and overlaid movement of the following
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
gear.
axes (which are not path axes) and from their associated coupling factors.
axis are not taken into account.
Significance
The coupling definition of the axis group is deleted. Additional
axis groups can be defined by means of EGDEF until the
maximum number of simultaneously activated axis groups is
reached. This call triggers a preprocessing stop.
Axis couplings
9.4 Electronic gear (EG)
613