Job Planning - Siemens SINUMERIK 840D sl Programming Manual

Questions about the manual
If you have any queries (suggestions, corrections) in relation to this documentation, please
fax or e-mail us:
Fax:
E-mail:
A fax form is available in the appendix of this document.
SINUMERIK Internet address
http://www.siemens.com/sinumerik
"Fundamentals" and "Job Planning" Programming Manual
The description of the NC programming is divided into two manuals:
1. Fundamentals

2. Job planning

Availability of the described NC language elements
All NC language elements described in the manual are available for the SINUMERIK
840D sl. The availability regarding SINUMERIK 828D can be found in column "828D" of the
"List of statements (Page 821)".
Job Planning
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
+49 9131- 98 2176
mailto:docu.motioncontrol@siemens.com
The "Fundamentals" Programming Manual is intended for use by skilled machine
operators with the appropriate expertise in drilling, milling and turning operations. Simple
programming examples are used to explain the commands and statements which are
also defined according to DIN 66025.
The Programming Manual "Job Planning" is intended for use by technicians with in-depth,
comprehensive programming knowledge. By virtue of a special programming language,
the SINUMERIK control enables the user to program complex workpiece programs (e.g.
for free-form surfaces, channel coordination, ...) and makes programming of complicated
operations easy for technologists.
Preface
5