Siemens SINUMERIK 840D sl Programming Manual page 122

Flexible NC programming
1.13 Program coordination (INIT, START, WAITM, WAITMC, WAITE, SETM, CLEARM)
Example: Program from workpiece
Program code
N10 INIT(2,"/_N_WKS_DIR/_N_SHAFT1_WPD/_N_CUT1_MPF")
Example: INIT command with relative path specification
Program /_N_MPF_DIR/_N_MAIN_MPF is selected in channel 1
Program code
N10 INIT(2,"MYPROG")
122
Comments
; Select program /_N_MPF_DIR/_N_MYPROG_MPF in channel 2
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
Job Planning