Siemens SINUMERIK 840D sl Programming Manual page 806

User stock removal programs
15.2 Generate contour table (CONTPRON)
Example 2
Generating a contour table with
● Name KTAB
● Max. 92 contour elements (circles, straight lines)
● Mode: Longitudinal turning, outer machining
● Preparation, forwards and backwards
NC program:
Program code
N10 DEF REAL KTAB[92,11]
N20 DEF CHAR BT="L"
N30 DEF INT HE=0
N40 DEF INT MODE=1
N50 DEF INT ERR=0
...
806
Comments
; Contour table with name KTAB and
max. 92 contour elements,
parameter value 11 is a fixed
quantity.
; Mode for CONTPRON: Longitudinal
turning, outer machining
; Number of relief cut elements=0
; Preparation, forwards and
backwards
; Fault feedback signal
Programming Manual, 06/2009, 6FC5398-2BP20-0BA0
Job Planning